Anchor 3/4″ x 5 1/2″ Simpson Wedge-All (6) Mechanical Anchor

Description

Simpson Strong Tie

Wedge-All

5 1/2″ Long

3/4″ Diameter

6 Each

3 5/8″ Thread Length

Carbon Steel

Zinc Plated
Wedge-All® 

A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All® wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as Types 303/304 and Type 316 stainless steel. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.

Key Features
Material
Carbon

Finish
Carbon steel anchors are available zinc-plated or mechanically galvanized

Installation
Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate the embedment depth and the dust from drilling

Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
Tighten to the required installation torque.
Caution
Do not use an impact wrench to set or tighten anchors.
Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity.
Product Information Tables
Size (in.)
Zinc Plated Model No. Mechanically
Mechanically Galvanized Model No.
Drill Bit Dia. (in.)
Thread Length (in.)
Quantity
Box
Carton
1/4 x 1 3/4
WA25134MG
1/4
15/16
100
500
1/4 x 2 1/4
WA25214MG
1 7/16
100
500
1/4 x 3 1/4
WA25314MG
2 7/16
100
500
3/8 x 2 1/4
WA37214
WA37214MG
3/8
1 1/8
50
250
3/8 x 2 3/4
WA37234
WA37234MG
1 5/8
50
250
3/8 x 3
WA37300
WA37300MG
1 7/8
50
250
3/8 x 3 1/2
WA37312
WA37312MG
2 1/2
50
250
3/8 x 3 3/4
WA37334
WA37334MG
2 5/8
50
250
3/8 x 5
WA37500
WA37500MG
3 7/8
50
200
3/8 x 7
WA37700
WA37700MG
5 7/8
50
200
1/2 x 2 3/4
WA50234
WA50234MG
1/2
1 5/16
25
125
1/2 x 3 3/4
WA50334
WA50334MG
2 5/16
25
125
1/2 x 4 1/4
WA50414
WA50414MG
2 13/16
25
100
1/2 x 5 1/2
WA50512
WA50512MG
4 1/16
25
100
1/2 x 7
WA50700
WA50700MG
4 9/16
25
100
1/2 x 8 1/2
WA50812
WA50812MG
6
25
50
1/2 x 10
WA50100
WA50100MG
6
25
50
1/2 x 12
WA50120
WA50120MG
6
25
50
5/8 x 3 1/2
WA62312
WA62312MG
5/81 7/8
80
5/8 x 4 1/2
WA62412
WA62412MG
2 7/8
20
80
5/8 x 5
WA62500
WA62500MG
3 3/8
20
80
5/8 x 6
WA62600
WA62600MG
4 3/8
20
80
5/8 x 7
WA62700
WA62700MG
5 3/8
20
80
5/8 x 8 1/2
WA62812
WA62812MG
6
20
40
5/8 x 10
WA62100
WA62100MG
6
10
20
5/8 x 12
WA62120
WA62120MG
6
10
20
3/4 x 4 1/4
WA75414
WA75414MG
3/4
2 3/8
10
40
3/4 x 4 3/4
WA75434
WA75434MG
2 7/8
10
40
3/4 x 5 1/2
WA75512
WA75512MG
3 5/8
10
40
3/4 x 6 1/4
WA75614
WA75614MG
4 3/8
10
40
3/4 x 7
WA75700
WA75700MG
5 1/8
10
40
3/4 x 8 1/2
WA75812
WA75812MG
6
10
20
3/4 x 10
WA75100
WA75100MG
6
10
20
3/4 x 12
WA75120
WA75120MG
6
5
10
7/8 x 6
WA87600
WA87600MG
7/8
2 1/8
5
20
7/8 x 8
WA87800
WA87800MG
2 1/8
5
10
7/8 x 10
WA87100
WA87100MG
2 1/8
5
10
7/8 x 12
WA87120
WA87120MG
2 1/8
5
10

1 x 6
WA16000
WA16000MG
1
2 1/4
5
20
1 x 9
WA19000
WA19000MG
2 1/4
5
10
1 x 12
WA11200
WA11200MG
2 1/4
5
10
1 1/4 x 9
WA12590
1 1/4
2 3/4
5
10
1 1/4 x 12
WA12512
2 3/4
5
10
The published length is the overall length of the anchor. Allow one anchor diameter for the nut and washer thickness plus the fixture thickness when selecting the minimum length.
Material Specifications
Carbon Steel — Zinc Plated
Component Materials
Anchor BodyNut
WasherClip
Material Meets minimum 70,000 psi tensile strength
Carbon Steel ASTM A 563, Grade A
Carbon Steel
Carbon Steel
Material Specifications
Carbon Steel — Zinc Plated
Component Materials
Anchor Body
Nut
Washer
Clip
Material Meets minimum 70,000 psi tensile strength
Carbon Steel ASTM A 563, Grade A
Carbon Steel
Carbon Steel
21d wa75512 (6)